hellboy dc comics action figures marvel model file stl for 3d printing fdm-fff dlp-sla-sls 3D-printmodel

youtube video: https://youtu.be/uvexgdxrrny

follow me

facebook: https://www.facebook.com/groups/1797954133626126/?ref=bookmarks
istagram: cody3d1 https://www.instagram.com/cody3d1/
twitter: https://twitter.com/cody3d
artstation: https://www.artstation.com/cody3d

stl file optimized for fdm-fff dlp-sla-sls printing

hellboy 3d model
for printing 1:8 for fdm-fff, 1:14 for dlp-sla-sls, miniature assembly figure
more than 200 hours of modeling
two versions, long and short horns
however, the dimensions can be changed with each slicer

in total hellboy and composed of 4,178 mil points
all the files have been decimated by the polygons, but without losing the details, this makes the light files suitable for each computer

dimensions approximately fdm-fff z 31cm x 12.5cm y 15cm
z 11.8inch x 4.9inch y 5.9inch

dimensions approximately dlp-sla-sls z 13cm x 6.9cm y 7.1cm
z 5.1inch x 2.7inch y 2.8inch

all files are already in place for optimal printing

hellboy 3d model was designed to get a clean print result, without considering printing material consumption, however, you are free to rotate, or scale,
every part of the model in the most convenient way for you.
each file has been checked and repaired with netfabb
the parts of the model are already positioned for 3d printing
compatible with every slicer- simplify3d, care, slic3r, etc ...
all the parts of the model have been cut so as to be printed vertically, for a higher quality of printing

hellboy

hellboy is the name given by professor trevor bruttenholm to the demon anung a rama, summoned to earth on december 23, 1944 by the evil russian sorcerer rasputin on behalf
of the ahnenerbe division of the ss with the intention of changing the fortunes of the war (in what was known as "ragnarok project"); the entity, however,
is taken away from the nazis by the allies when it is still a puppy and will be raised by bruttenholm as a son in a us army base in new mexico.

become an adult hellboy becomes the best detective of the bureau of paranormal research and defense, in which he has as companions and allies the young
pyrocinetal elizabeth "liz" sherman, the amphibious humanoid abraham "abe" sapien, johann kraus, a mechanical android german who manipulates and controls metals with his smoke,
ben daimio, an agent in the transformation into a werewolf jaguar, alice monaghan, a girl who kept some magical abilities and roger, a little man of superhuman strength found
in a castle in romania.
hellboy is very tall (about 2 meters), huge and has red skin, a long tail and two large horns that periodically shortens. his right forearm is huge and made of a very hard and
unknown material. in place of feet it has goat legs. beard and hair are black.
hellboy's right arm seems indestructible and represents his demonic heritage. it has superhuman strength, remarkable strength and a regenerating factor that does not make it totally
invulnerable. it ages much more slowly than humans. he has great investigative skills and is an expert in using both white and firearms.
"wikipedia"

recommended settings for printing
each part was cut to be printed vertically, to have a better quality print, so for the upper parts,
it is recommended to print with a 4-5 skirt

quality
layer height: 0.1mm*
initial layer thickness: 0.3mm
bottom/top pattern: lines
skin perimeter line count: 0
horizontal expansion: 0.04mm (when entering 0.04mm index, the 3d printer perceives the model as monolith, i.e. as having no hidden layers).
*layer height 0.1mm is recommended for a better quality for the printed model. however, the printing time will double.

as a stl file provider, our goal is to ensure that the files are error-free and printable in the most accurate way. this is why we only test print the most difficult segments of
the model’s parts.

speed setups:
infill speed: 30mm/s
outer shell speed : 30mm/s
inner shell speed: 20mm/s
top/bottom speed: 20mm/s
support speed: 50mm/s
travel speed: 150mm/s
skirt speed: 30mm/s
amount of slower layers: 4
infill:

infill pattern: grid
line distance: 1.5mm
infill overlap: 20%
infill layers: 0
support:

enable support: check
placement: everywhere
overhang angle: 30°
x/y distance: 0.7mm
top distance: 0.2mm
bottom distance: 0.2mm
stair step height: 0.5mm
join distance: 0.7mm
area smoothing: 0.6mm
use towers: check
pattern: grid
line distance: 1.5mm